These small corm cup risers provide a secure holding place for 5 corm cups. Available with or without tabs for affixing labels (designed around the Niimbot label printers). These help solve the issue of small pots where they’re far too easy to knock over!
First photo for demonstration only, the item in the listing is the front short riser.
Measurements:
Height: 57mm
Width: 297mm
Depth: 50mm
Available in 3 sizes individually or as a bundle of all 3 for a discount!
They’re a perfect fit for the clear acrylic display cases that are popular to use in the Alocasia hobby as they make great mini greenhouses.
Acrylic display cases compatibility
I designed these risers with the cases below in mind so they’re a perfect fit. These are available from Amazon but aren’t my own personal products. They’re not necessarily the best ones, just the ones that I have bought and use myself. These are a tight fit but I wanted to maximise the space and make them nice and snug so they’re secure.
All 3 tiers fit perfectly in the small “eYotto Acrylic Display case for collectibles” (30cm x 17.9cm x 24.6cm) - I think that these are the ones i’ve seen most of.
I also have a couple of larger acrylic display cases “Clear Acrylic Display Case 4 Tier with magnetic door” - These ones stand upright and with a shelf installed in the middle, can hold 2 sets of these corm cup risers, with also a little room spare at the front for either an extra one of the tiers or some corm riser pots so you could have the best of both worlds!
Finding these Display cases.
You should be able to copy and paste each name within the ““ quotation marks and find them with a quick search on amazon, but i’ll also provide links below for ease. These will open in a new tab so don’t worry about losing your place.
Small Acrylic display case (Mentioned first)
Affiliate link: https://amzn.to/3POILEN (using this link doesn’t affect the price for you but I do earn a small % commission from amazon for referring you).
Non-affiliate link: https://amzn.eu/d/086Zv172
Larger Acrylic display case (Mentioned second)
Affiliate link: https://amzn.to/4ugw8Bh (using this link doesn’t affect the price for you but I do earn a small % commission from amazon for referring you).
Non-affilliate link: https://amzn.eu/d/04p29WWw
Please note that these corm cup holders/risers aren’t rated for higher than ambient temperatures, so they’re not intended for use with heat mats or other heat sources as this could lead to warping/distortion over time and prolonged exposure.
** These colours are made out of PLA. PLA isn’t as suitable for higher humidity environments or high temperatures but the range of colours available allows for a larger choice of options. I have used cover pots and self watering outers that I designed and made out of PLA which have been used in my grow tent that sits at 28c and 80% minimum humidity (typically 85-95%) with no problems for 2 years, hence why I’m offering PLA for this product. If used as intended, this product will be more than sufficient. If you want the absolute best longevity then I’d recommend choosing a colour that doesn’t come with a 2 asterisks ( ** ) as these are made out of PETG.
These small corm cup risers provide a secure holding place for 5 corm cups. Available with or without tabs for affixing labels (designed around the Niimbot label printers). These help solve the issue of small pots where they’re far too easy to knock over!
First photo for demonstration only, the item in the listing is the front short riser.
Measurements:
Height: 57mm
Width: 297mm
Depth: 50mm
Available in 3 sizes individually or as a bundle of all 3 for a discount!
They’re a perfect fit for the clear acrylic display cases that are popular to use in the Alocasia hobby as they make great mini greenhouses.
Acrylic display cases compatibility
I designed these risers with the cases below in mind so they’re a perfect fit. These are available from Amazon but aren’t my own personal products. They’re not necessarily the best ones, just the ones that I have bought and use myself. These are a tight fit but I wanted to maximise the space and make them nice and snug so they’re secure.
All 3 tiers fit perfectly in the small “eYotto Acrylic Display case for collectibles” (30cm x 17.9cm x 24.6cm) - I think that these are the ones i’ve seen most of.
I also have a couple of larger acrylic display cases “Clear Acrylic Display Case 4 Tier with magnetic door” - These ones stand upright and with a shelf installed in the middle, can hold 2 sets of these corm cup risers, with also a little room spare at the front for either an extra one of the tiers or some corm riser pots so you could have the best of both worlds!
Finding these Display cases.
You should be able to copy and paste each name within the ““ quotation marks and find them with a quick search on amazon, but i’ll also provide links below for ease. These will open in a new tab so don’t worry about losing your place.
Small Acrylic display case (Mentioned first)
Affiliate link: https://amzn.to/3POILEN (using this link doesn’t affect the price for you but I do earn a small % commission from amazon for referring you).
Non-affiliate link: https://amzn.eu/d/086Zv172
Larger Acrylic display case (Mentioned second)
Affiliate link: https://amzn.to/4ugw8Bh (using this link doesn’t affect the price for you but I do earn a small % commission from amazon for referring you).
Non-affilliate link: https://amzn.eu/d/04p29WWw
Please note that these corm cup holders/risers aren’t rated for higher than ambient temperatures, so they’re not intended for use with heat mats or other heat sources as this could lead to warping/distortion over time and prolonged exposure.
** These colours are made out of PLA. PLA isn’t as suitable for higher humidity environments or high temperatures but the range of colours available allows for a larger choice of options. I have used cover pots and self watering outers that I designed and made out of PLA which have been used in my grow tent that sits at 28c and 80% minimum humidity (typically 85-95%) with no problems for 2 years, hence why I’m offering PLA for this product. If used as intended, this product will be more than sufficient. If you want the absolute best longevity then I’d recommend choosing a colour that doesn’t come with a 2 asterisks ( ** ) as these are made out of PETG.
